Does My Device Support 6 GHz Wi-Fi? How to Check

Your device supports 6 GHz Wi-Fi only if its Wi-Fi hardware is Wi-Fi 6E or Wi-Fi 7. A plain Wi-Fi 6 device can’t use the band at all, and a Windows PC also needs Windows 11 and a current driver. The fastest checks: compare your Apple device against Apple’s published list; on Windows, check your adapter’s model and open one Settings page to see which band you’re on; and read your Android phone’s official spec sheet.

This guide is based on Apple, Microsoft, Intel, NETGEAR, TP-Link and Wi-Fi Alliance documentation. It’s worth checking before you pay extra for a router with 6 GHz, because a 6 GHz radio does nothing for devices that can’t connect to it.

The short rule: Wi-Fi 6E or Wi-Fi 7

The Wi-Fi Alliance describes Wi-Fi 6E devices as ones that “extend the benefits that Wi-Fi 6 already provides in the 2.4 and 5 GHz bands to 6 GHz.” The naming trips people up: “Wi-Fi 6” alone means no 6 GHz. Intel puts it bluntly: “Wi-Fi 6 (or lower) devices do not support the 6 GHz band.” Intel says all its Wi-Fi 7 products support 6 GHz, but not every Wi-Fi 7 product does; some Wi-Fi 7 routers skip the band, as we explain in Dual-Band Wi-Fi 7: What You Lose Without 6 GHz.

Hardware is only the first requirement. The operating system, driver and your country’s rules also have to allow it. In the US, the Wi-Fi Alliance notes, the FCC “approved use of 1200 MHz in the 6 GHz band for unlicensed technologies.”

iPhone and iPad

Apple’s support article “Use Wi-Fi 6E networks with Apple devices” (published October 27, 2026) lists which models can join Wi-Fi 6E or Wi-Fi 7 networks:

Use that support article as the source of truth. Apple’s separate Wi-Fi specifications table in its deployment guide isn’t consistent for iPhone 15: it shows the model with and without a 6 GHz row in different places, while the support article excludes it.

How to check on the device: Apple says a “Wi-Fi 6E mode” setting appears in your network’s details in Wi-Fi settings, and only “when your supported device is connected to a Wi-Fi 6E or Wi-Fi 7 network.” Seeing the setting tells you the device supports 6 GHz and has joined a Wi-Fi 6E or Wi-Fi 7 network. If you don’t see it while connected to a 6 GHz-capable router, either your device isn’t on Apple’s list or the router’s 6 GHz band isn’t on.

To find your model, go to Settings > General > About on iPhone or iPad, or Apple menu > About This Mac.

Mac

The model list is in the table above. Apple’s deployment guide shows the difference within one product line: the M2 MacBook Air tops out at 802.11ax on 5 GHz with no 6 GHz entry, while the M3 MacBook Air adds an “ax@6 GHz” row. So two MacBook Airs that look the same can differ here.

Windows PCs

A Windows PC needs three things: Windows 11, a Wi-Fi 6E or Wi-Fi 7 adapter, and an up-to-date driver.

Windows 10 won’t work. NETGEAR’s support article says “Microsoft recently announced that they are not backporting 6 GHz support to Windows 10,” so “if your PC uses Windows 10, you can’t use 6 GHz WiFi until you upgrade to Windows 11.” Intel’s requirements also call for “Microsoft Windows 11, including the latest updates.”

Step 1: check the adapter. Microsoft’s support page says to open Command Prompt or Terminal, type netsh wlan show drivers, and look at “Radio types supported.” An 802.11ax entry means Wi-Fi 6 or 6E, so it doesn’t settle 6 GHz by itself. Note the adapter name at the top of the output and look it up on the maker’s site. Intel says “all Intel Wi-Fi 6E (Gig+) and Intel Wi-Fi 7 products support the new 6 GHz band”; its AX210 is a Wi-Fi 6E model.

Step 2: update the driver. Intel lists driver version 22.70.0 or later for its Wi-Fi 6E adapters and 23.10.0 or later for Wi-Fi 7. Wi-Fi 7 features also need Windows 11 version 24H2 or later, according to both Intel and Microsoft.

Step 3: check the band you’re actually on. Microsoft’s path is Settings > Network & internet > Wi-Fi > your network’s properties, then look at “Network band (channel).” If it says 6 GHz, you’re connected on 6 GHz. Microsoft says that if it lists two bands, such as 5 GHz and 6 GHz, MLO (Multi-Link Operation) is supported on that connection; our Wi-Fi 7 MLO guide explains what that means.

If the card supports 6E but you still can’t see the network: Intel says to confirm with the PC maker, because the band may not be enabled on every platform, and a card you installed yourself should be one your system maker has “validated and approved.”

Android phones and tablets

There’s no single list for Android, and settings menus vary by phone maker. The reliable check is your exact model’s official spec sheet from the manufacturer: look for “Wi-Fi 6E” or “Wi-Fi 7” together with 6 GHz. TP-Link’s support article gives a rough rule of thumb: “Client devices manufactured before 2020 likely don’t support 6GHz Wi-Fi.” If your spec sheet doesn’t say, ask the device maker.

Still can’t connect? Check the region and the router

• Region: TP-Link notes that “regulators in some regions have not approved the 6 GHz band,” and Apple says 6 GHz features “are not available in all regions.” Apple also says Wi-Fi 6E isn’t available in mainland China. A device sold for another region may have 6 GHz disabled or limited.
• Router: your router has to broadcast a 6 GHz network. Some combine all bands under one name, so you may not see a separate “6G” network. Our 2.4 GHz vs. 5 GHz vs. 6 GHz guide explains when 6 GHz helps, and Wi-Fi 6 vs. Wi-Fi 6E covers whether it’s worth paying for.

Is it worth buying a 6 GHz router?

Count your 6 GHz-capable devices first. If only one phone qualifies, a 6 GHz router mostly helps that phone. If your main laptop, phone and streaming box all qualify, and they sit within range of the router (6 GHz generally has shorter range than 5 GHz), a 6 GHz router is more likely to pay off.

Sources and verification